Humboldt, Arizona
Well pump replacement in Humboldt
Call about well pump replacement in Humboldt and get connected with an independent local well pump company that knows the area.
This is a referral line. When you call, you are connected with an independent local well pump company.
Humboldt wells and well pump replacement
A replacement pump has to be pulled from the depth it is set at, and in Humboldt that is usually a few hundred feet. Recorded wells in 86329 have a median depth of 265 ft, and 90 percent are shallower than 510 ft.[source] The median static water level is 85 ft in 86329, which the company uses with depth to decide where to set the new pump.[source]
| ZIP | Area | Well records | Median depth | Middle half of depths | Median static water level | Median tested yield |
|---|---|---|---|---|---|---|
| 86329 | Humboldt | 2,314 | 265 ft | 160 to 400 ft | 85 ft | 15 gpm |
What well pump replacement involves
Replacing a submersible well pump means pulling the pipe, wire and pump out of the well, swapping the pump, and lowering everything back down. On deep wells that is a crew, a pump hoist or rig, and a few hours or more.
Signs to watch for in a Humboldt home
- Water output has dropped steadily over months
- The company found a failed motor after testing at the surface
- The pump motor has failed and will not start
- The pump runs but moves little or no water
Good to know in Humboldt
- The median tested yield in 86329 is 15 gallons per minute.[source]
- Even so, about 8 percent of Humboldt wells are deeper than 600 ft.[source] Look up your own record.
Humboldt has the shallowest wells of the towns on this site. The median depth is 265 ft and half of wells fall between 160 and 400 ft.[source] The median static water level is 85 ft.[source]
Questions to ask the company
- What is your Arizona ROC license number?
- How did you confirm the pump itself failed?
- What size pump do you recommend for my depth and yield, and why?
- Will you replace the wire, pipe or check valve while it is out?
Well pump replacement in Humboldt: questions
Is my old pump's information on file?
Sometimes. The ADWR record for your well can include the driller's log and pump details.[source]
How do I know the pump needs replacing and not a repair?
A company can test the pump and wiring from the surface before pulling it. Ask what tests they ran.
Is Humboldt in the Prescott Active Management Area?
Yes. Humboldt is inside the Prescott Active Management Area.[source]
Well pump replacement in Humboldt
Call and describe what is happening to a local well pump company.
Call about a Humboldt well(928) 655-8940